EP-60R Fuel Flow Sensor image

EP-60R Fuel Flow Sensor

Gasoline only. One required per engine. Up to 3 engines supported.


  • Replaces “EP-10 Fuel Flow”
  • Outputs:
    • Fuel Flow
    • Tank Fuel Used
    • Trip Fuel Used
    • Seasonal Fuel Used

Cable Length:  10 Ft
Fuel Line Diameter:  3/8" (9.5 mm) Inside Diameter
Flow Rate Measured:  Optimized for 0.6-45 Gal/hr but can measure outside these values
Added Back Pressure to the fuel system: 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr
Installation Location:  Above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the line
Package: The EP-60R, LowranceNet T and 2 (two) 1" hose clamps
Fuel Type: Gasoline only. The EP-60R does not operate diesel engine fuel systems, or on any fuel system with a return fuel line or sump.
Hole required to route through a bulkhead: 7/8" (22mm)
Multiple EP-60R sensors possible: Yes

 

For use with LowranceNET networks with red connectors (do not connect to blue connectors).

Our network of expert dealers can help you choose the right product for your boat. Find a dealer near you.
Search for the answer you are looking for or download many of our manuals available online. Read product articles, watch product videos or locate a dealer for support.