EP-60R Fuel Flow Sensor

Electronic Probe Sensor

Must be configured by a Navico MFD or LMF gauge. Replaces EP-10 Fuel Flow


Key Features

  • Cable Length: 10 ft.
  • Fuel Line Diameter: 3/8" (9.5 mm) Inside Diameter
  • Flow Rate Measured: Optimized for 0.6-45 Gal/hr. but can measure outside these values
  • Added Back Pressure to the fuel system: 0.5 PSI at 20 Gal/hr.; 1 PSI at 40 Gal/hr.
  • Installation Location: Above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the line
  • Package: The EP-60R, LowranceNet T and 2 (two) 1" hose clamps
  • Fuel Type: Gasoline only. The EP-60R does not operate diesel engine fuel systems, or on any fuel system with a return fuel line or sump.
  • Hole required to route through a bulkhead: 7/8" (22mm)
  • Multiple EP-60R sensors possible: Yes (Up to 3 engines

Specifications

Overview
Outputs

Engine Parameters, Dynamic, PGN: 127489

Engine Instance
Fuel Flow, High Resolution

Fuel Used, PGN: Proprietary
Tank Fuel Used, Trip Fuel Used, Seasonal Fuel Used

Fluid Level Alarm, PGN: Proprietary Alarm Status

Overview
Outputs

Engine Parameters, Dynamic, PGN: 127489

Engine Instance
Fuel Flow, High Resolution

Fuel Used, PGN: Proprietary
Tank Fuel Used, Trip Fuel Used, Seasonal Fuel Used

Fluid Level Alarm, PGN: Proprietary Alarm Status

#000-0120-39
USD MSRP: $199.95

Documents


Software Updates

No software available.