Outboard Pilot Hydraulic Pack

Available for HDS Gen2  and Gen3 units

Autopilot pack for Lowrance High Definition System (HDS) displays, providing automatic steering for hydraulic-steer outboard motors. An extra pair of hands when you need it, the Outboard Pilot, featuring Lowrance SmartSteer™ control from your HDS Gen2 or Gen3, will steer to a heading, waypoint or route.

Everything you need in one box to fit an autopilot to your hydraulic-steer outboard motor, the Outboard Pilot lets you focus on fishing activity while keeping the boat on course (NOTE: Mercury Verado motors require the Verado Fitting Kit NOTE: ORB fitting kit for 2014 & later Seastar systems coming soon).  When connected to an HDS Gen2 or Gen3, the Outboard Pilot can steer to a waypoint or along a route, select a turn pattern or simply hold a constant heading. The Lowrance SmartSteer™ user interface allows you to easily switch between electric-steer, trolling-motor control and outboard motor control directly from your HDS display. And, with your HDS display, you can easily convert trails to routes – so you can retrace a previous track and get your boat back to the dock from your fishing area.

The Lowrance Outboard Pilot is recommended for single and dual outboard set-ups, on boats that are 30 feet and less, in length.

Hydraulic-Steer Kit includes everything to connect your existing hydraulic-steering manual helm pump:

  • Pump-1 is a 0.8L reversible hydraulic pump designed to interface to Seastar steering
  • Coming Soon - Hydraulic fitting Kit is compatible with Seastar manual helm pumps
View full description

Key Features

  • Steer your outboard motor to a heading, waypoint, route or cursor, with control from your HDS Gen2 display.
  • New Lowrance SmartSteer™ interface provides control of both your hydraulic-steer outboard motor, as well as the MotorGuide Xi5 Pinpoint electric-steer trolling motor.
  • “One-touch” route creation from saved trails.
  • Repeat your path with automatic turn patterns.
  • Recommended for single-outboard setups, on boats that are 30 feet and less, in length.
  • VRF (Virtual Rudder Feedback) – simplifies pilot installation -- eliminating the need for a rudder position sensor.
  • Easy setup – straightforward guide steps you through first-time install.
  • Easy-to-install, plug-and-socket connection – with no complex terminal wiring
  • Supported by Lowrance Service program

Specifications

Overview
Warranty Two year limited
Overview
Warranty Two year limited
Power
Power Supply (Supply Voltage) 12v DC
Technical/Environmental
Water Resistance IPx5
Product Width [mm] 210
Product Height [mm] 58
Product Depth [mm] 188
Weight [kg] 1
Communications
NMEA Input Micro-C
Information
Warranty period Two year limited warranty, plus Lowrance Advantage coverage
Autopilot/Auto-Steering
NAC-1 drive output: 12V, Max 16 Amps (instantaneous)
#000-11748-001
Outboard Pilot Hydraulic Pack Outboard Pilot Hydraulic Pack


What’s in the box

NAC-1 Autopilot Computer 000-11769-001
The brains behind your Lowrance Outboard Pilot system. It contains the steering computer and electronics for the drive unit motor
 
PUMP-1 Hydraulic Pump 000-11771-001
0.8L reversible hydraulic pump, compatible with Seastar manual helm pumps up to 14ci.
 
Point-1AP Heading and GPS Sensor 
Provides extremely accurate and rapid boat position update, along with heading for accurate boat direction at any speed
 
Hydraulic Fitting Kit
Everything you need to connect with your existing hydraulic system – including t-connectors, hoses and oil.
NOTE: Mercury Verado motors require the Verado Fitting Kit
NOTE: ORB fitting kit for 2014 & later Seastar systems coming soon.
 
Auto/Standby Button
Mounts anywhere on dash and changes Autopilot from STBY to AUTO mode with one press.
 
NEMA 2000 Starter Kit
Contains: 4 Way NMEA2000 Block, Terminator Kit, NMEA2000 Power Cable, one each of 2,6 and 15 ft NMEA2000 cables.

Documents


Software Updates

No software available.